miServer and localhost
Forum rules
This forum is for discussing APL-related issues. If you think that the subject is off-topic, then the Chat forum is probably a better place for your thoughts !
This forum is for discussing APL-related issues. If you think that the subject is off-topic, then the Chat forum is probably a better place for your thoughts !
7 posts
• Page 1 of 1
miServer and localhost
Hi,
My name is Marco, from Brazil. I'm developing a site using miServer (windows 10). I think I have a localhost configuration problem. Could someone help me?
I was using it with success for long time but now I am receiving the same following message:
)load mserver
C:\MiServer\mserver saved Mon Dec 14 07:39:30 2015
Start 'Intro' ⍝ Run the demo server
Start 'Intro' ⍝ Run the demo server
0
MiServer started on port: 8088
3:VALUE ERROR
HttpDate[7] r←((⎕NEW System.DateTime ts).AddMinutes minOffset).ToUniversalTime.GetDateTimeFormats'R'
∧
Dyalog APl Status:
Could not load bridge interface functions. (Error 0x000036b1: "Unknown error")
Thanks,
Marco Gantois
My name is Marco, from Brazil. I'm developing a site using miServer (windows 10). I think I have a localhost configuration problem. Could someone help me?
I was using it with success for long time but now I am receiving the same following message:
)load mserver
C:\MiServer\mserver saved Mon Dec 14 07:39:30 2015
Start 'Intro' ⍝ Run the demo server
Start 'Intro' ⍝ Run the demo server
0
MiServer started on port: 8088
3:VALUE ERROR
HttpDate[7] r←((⎕NEW System.DateTime ts).AddMinutes minOffset).ToUniversalTime.GetDateTimeFormats'R'
∧
Dyalog APl Status:
Could not load bridge interface functions. (Error 0x000036b1: "Unknown error")
Thanks,
Marco Gantois
- Gantois
- Posts: 80
- Joined: Thu Apr 17, 2014 9:44 am
Re: miServer and localhost
Hi Marco
Could you send support@dyalog.com a note, including the contents of the Help->About box from the interpreter that you are using, and also the output from
Could you send support@dyalog.com a note, including the contents of the Help->About box from the interpreter that you are using, and also the output from
⎕using←'System'
{⎕ml←0 ⋄ ↑⍕¨⍵}AppDomain.CurrentDomain.GetAssemblies
-
AndyS|Dyalog - Posts: 257
- Joined: Tue May 12, 2009 6:06 pm
Re: miServer and localhost
Hi Marco,
Were you using MiServer successfully on Windows 10 before, or have you recently upgraded to Windows 10?
You haven't mentioned which version of Dyalog you're using, but all current versions of Dyalog are built using Visual Studio 2005.
I've translated your hex 36b1 to 14001 and searched the internet--this link may help you:
https://social.msdn.microsoft.com/Forum ... o-load-dll
Regards,
Vince
Were you using MiServer successfully on Windows 10 before, or have you recently upgraded to Windows 10?
You haven't mentioned which version of Dyalog you're using, but all current versions of Dyalog are built using Visual Studio 2005.
I've translated your hex 36b1 to 14001 and searched the internet--this link may help you:
https://social.msdn.microsoft.com/Forum ... o-load-dll
Regards,
Vince
- Vince|Dyalog
- Posts: 413
- Joined: Wed Oct 01, 2008 9:39 am
Re: miServer and localhost
Andy and Vince,
Thanks for your repply.
Andy, I sent email to support@dyalog.com with information as you asked me:
⎕using←'System'
{⎕ml←0 ⋄ ↑⍕¨⍵}AppDomain.CurrentDomain.GetAssemblies
VALUE ERROR
{⎕ML←0 ⋄ ↑⍕¨⍵}AppDomain.CurrentDomain.GetAssemblies
∧
message from box DyalogAPL/64 - Status:
Could not load bridge interface functions. (Error 0x000000cb: "Unknown error")
Vince,
My apl is:
Version: 13.2.17617.0 64 Unicode
Created: Apr 28 2013 at 18:29:22
Build ID: 7f3489a8
Serial Number: 002607
I have changed from windows 7 to windows 10 recently and I had problems with my notebook, solved only after reformat C disk and reinstall windows 10, Apl and others softwares, but not Visual Studio. After this I was working in my site (miserver/localhost) without problems for about two weeks, until get that message.
Do you recommend me install Visual Studio 2005? (I will read the link)
Thanks for your help
Marco Gantois
Thanks for your repply.
Andy, I sent email to support@dyalog.com with information as you asked me:
⎕using←'System'
{⎕ml←0 ⋄ ↑⍕¨⍵}AppDomain.CurrentDomain.GetAssemblies
VALUE ERROR
{⎕ML←0 ⋄ ↑⍕¨⍵}AppDomain.CurrentDomain.GetAssemblies
∧
message from box DyalogAPL/64 - Status:
Could not load bridge interface functions. (Error 0x000000cb: "Unknown error")
Vince,
My apl is:
Version: 13.2.17617.0 64 Unicode
Created: Apr 28 2013 at 18:29:22
Build ID: 7f3489a8
Serial Number: 002607
I have changed from windows 7 to windows 10 recently and I had problems with my notebook, solved only after reformat C disk and reinstall windows 10, Apl and others softwares, but not Visual Studio. After this I was working in my site (miserver/localhost) without problems for about two weeks, until get that message.
Do you recommend me install Visual Studio 2005? (I will read the link)
Thanks for your help
Marco Gantois
- Gantois
- Posts: 80
- Joined: Thu Apr 17, 2014 9:44 am
Re: miServer and localhost
Vince,
I downloaded but the same problem persisted. My internet access is ok, and I was working normally using local host for about two weeks. Do you recomend install a Visual Studio complete package?
Regards
I downloaded but the same problem persisted. My internet access is ok, and I was working normally using local host for about two weeks. Do you recomend install a Visual Studio complete package?
Regards
- Gantois
- Posts: 80
- Joined: Thu Apr 17, 2014 9:44 am
Re: miServer and localhost
Vince,
I applied your recommendation and it is normaly running now.
Thanks very much for your prompt return and solution,
Regards,
Marco
I applied your recommendation and it is normaly running now.
Thanks very much for your prompt return and solution,
Regards,
Marco
- Gantois
- Posts: 80
- Joined: Thu Apr 17, 2014 9:44 am
Re: miServer and localhost
Although Marco's exact error message was different, I'll just add a link here to the advice which helped Marco:
http://www.dyalog.com/forum/viewtopic.php?f=22&t=869
Regards,
Vince
http://www.dyalog.com/forum/viewtopic.php?f=22&t=869
Regards,
Vince
- Vince|Dyalog
- Posts: 413
- Joined: Wed Oct 01, 2008 9:39 am
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group